Hot shot trucking is one of the fastest-growing segments of Canadian freight. The barrier to entry is lower than full tractor-trailer operations, the equipment is cheaper, and the demand for time-sensitive, partial-load freight keeps growing. But lower barrier does not mean easy money. This guide covers the real numbers — equipment, licensing, insurance, rates, and income — so you can decide whether hot shot trucking is the right move for your business.
What Is Hot Shot Trucking?
Hot shot trucking means hauling time-sensitive or expedited freight using a Class 3 to Class 5 medium-duty truck (typically a heavy-duty pickup like a Ram 3500 or Ford F-550) paired with a flatbed, gooseneck, or lowboy trailer. Loads are usually smaller than a full truckload — construction materials, oilfield equipment, agricultural parts, machinery components, or emergency replacement parts that need to arrive fast.
The defining characteristics are speed and flexibility. Where a full semi-truck might wait for a complete 44,000-pound load, a hot shot driver can take a 6,000-pound shipment door-to-door the same day.
Typical Equipment Setup
| Component | Common Options | GVWR Range |
|---|---|---|
| Truck | Ram 3500, Ford F-450/F-550, Chevy 3500HD | 10,000–19,500 lbs |
| Trailer | 40-ft gooseneck flatbed, 30-ft bumper pull, lowboy | 14,000–25,000 lbs |
| Combined GVW | — | 24,000–40,000 lbs |
Most hot shot operators run a 40-foot gooseneck flatbed trailer because it offers the best combination of capacity and versatility. A gooseneck can handle palletized freight, pipe, steel, equipment, and oversized items that won't fit in an enclosed trailer.
Licensing Requirements
One of the biggest misconceptions about hot shot trucking in Canada is that you do not need a commercial license. Whether you need a Class 1, Class 3, or can operate on a Class 5 depends entirely on the combined Gross Vehicle Weight Rating (GVWR) of your truck and trailer.
License Requirements by GVWR
| Combined GVWR | License Required | MELT Required? |
|---|---|---|
| Under 11,794 kg (26,000 lbs) | Class 5 (standard) | No |
| 11,794 kg – 24,000 kg | Class 3 (DZ in Ontario) | Varies by province |
| Over 24,000 kg or articulated | Class 1 (AZ in Ontario) | Yes |
If you run a Ford F-350 (GVWR ~6,350 kg) with a gooseneck trailer rated at 6,350 kg, you are right around the Class 5 threshold. Add a heavier trailer or overload and you cross into Class 3 territory. Many experienced hot shot operators recommend getting at least a Class 3 from the start — it gives you the flexibility to scale up without re-licensing.
Additional Requirements
- CVOR (Commercial Vehicle Operator's Registration) — Required in Ontario for any commercial vehicle or combination over 4,500 kg. Other provinces have equivalent safety certificates.
- NSC (National Safety Code) number — Required for carriers operating across provincial or international borders.
- IFTA (International Fuel Tax Agreement) — Required if you operate in more than one province or cross into the United States.
- US DOT number — Required for cross-border operations. Separate application through FMCSA.
- FAST card or NEXUS — Strongly recommended for Canada-US border crossings to reduce wait times.
Equipment Costs
The startup costs for hot shot trucking are significantly lower than a full tractor-trailer setup, but still represent a serious investment.
Used Equipment Budget
| Item | Cost Range |
|---|---|
| Heavy-duty pickup (3-5 years old, 80K-150K km) | $35,000–$60,000 |
| 40-ft gooseneck flatbed trailer (used) | $8,000–$20,000 |
| Straps, chains, binders, tarps, cargo securement | $2,000–$4,000 |
| ELD device (if required) | $300–$800 |
| GPS and communication equipment | $200–$500 |
| Total startup (used) | $45,500–$85,300 |
New Equipment Budget
A new truck (Ram 3500 Limited, Ford F-450 Platinum) runs $85,000 to $110,000 and a new PJ or Diamond C gooseneck trailer is $15,000 to $30,000. Total new equipment cost: $100,000 to $145,000.
Most successful hot shot operators start with a quality used truck — 2 to 4 years old with under 100,000 km — and reinvest profits into newer equipment once the business is established.
Ongoing Monthly Costs
| Expense | Monthly Cost |
|---|---|
| Truck payment (financed, used) | $800–$1,400 |
| Insurance | $670–$1,250 |
| Fuel (10,000–15,000 km/month) | $2,500–$4,500 |
| Maintenance and tires | $400–$800 |
| Licensing, IFTA, permits | $100–$200 |
| ELD, GPS, phone | $100–$250 |
| Total monthly overhead | $4,570–$8,400 |
Insurance Costs
Insurance is the second-largest ongoing expense after fuel, and it is non-negotiable. Hot shot trucking insurance in Canada typically costs $8,000 to $15,000 per year, depending on your driving record, location, equipment value, and cargo type.
Coverage Types Required
- Commercial auto liability — $1,000,000 minimum, $2,000,000 recommended. Required in every province.
- Cargo insurance — $100,000 minimum for most loads. Some shippers and brokers require $250,000.
- General liability — $2,000,000, often required by brokers and load boards.
- Physical damage (collision/comprehensive) — Covers your own truck and trailer. Not legally required but financially essential if your equipment is financed.
- Bobtail/non-trucking liability — Covers you when driving without a trailer attached.
New operators with less than 2 years of experience will pay at the higher end of the range. Some insurers will not cover first-year operators at all — shop around and work with a broker who specializes in commercial trucking.
Finding Loads
Hot shot loads come from four main sources, and most established operators use a combination of all four.
Load Boards
- major US load boards — The largest load board in North America. Most hot shot loads are posted under "flatbed" or "partial" categories. Subscription runs $50 to $200/month.
Direct Shipper Relationships
The highest-margin loads come from direct relationships with shippers — manufacturers, oilfield supply companies, construction firms, agricultural equipment dealers. These relationships take time to build but eliminate broker fees (typically 15% to 30% of the load value) and provide consistent, repeatable freight.
Freight Brokers
Brokers connect you with loads quickly but take a percentage. Focus on brokers who specialize in expedited or hot shot freight rather than general truckload brokers. Expect net rates of $1.50 to $2.50/mile after broker margin.
Dispatch Services
A third-party dispatch service finds loads, negotiates rates, and handles paperwork for a percentage of gross revenue (typically 5% to 10%). For new operators still building relationships, a good dispatcher can keep the wheels turning.
Rates and Income
Hot shot rates vary significantly by lane, load type, urgency, and season. Here are realistic 2026 Canadian numbers.
Rate Ranges
| Load Type | Rate per Loaded Mile |
|---|---|
| Standard flatbed freight | $1.50–$2.25 |
| Expedited/time-critical | $2.25–$3.00+ |
| Oilfield equipment (Western Canada) | $2.00–$3.50 |
| Construction materials | $1.50–$2.00 |
| Cross-border (Canada-US) | $2.00–$3.00 |
Realistic Annual Income
| Scenario | Monthly Revenue | Monthly Expenses | Monthly Net | Annual Net |
|---|---|---|---|---|
| New operator (8,000 loaded miles/month) | $14,000 | $8,000 | $6,000 | $72,000 |
| Established (10,000 loaded miles/month) | $22,000 | $9,500 | $12,500 | $150,000 |
| Top performer (12,000+ loaded miles) | $30,000 | $11,000 | $19,000 | $228,000 |
These are gross numbers before income tax. A realistic first-year net income for a new hot shot operator running consistently is $60,000 to $90,000. Experienced operators who have built direct shipper relationships and run efficiently can earn $120,000 to $180,000 net.
The key variable is loaded miles versus total miles. Deadheading (driving empty to your next pickup) destroys profitability. Target a deadhead percentage under 15% — every empty mile costs you $0.30 to $0.50 in fuel and wear without generating revenue.
Hot Shot vs Full Semi-Truck
| Factor | Hot Shot | Full Semi |
|---|---|---|
| Startup cost | $45,000–$85,000 | $120,000–$250,000 |
| Insurance (annual) | $8,000–$15,000 | $12,000–$25,000 |
| License required | Class 5 or 3 | Class 1 |
| MELT training | Sometimes | Always |
| Fuel cost per km | Lower | Higher |
| Revenue per load | Lower | Higher |
| Load availability | Moderate | High |
| Home time | More flexible | Less flexible |
| Annual income potential | $60,000–$180,000 | $80,000–$250,000+ |
Hot shot makes sense if you want lower startup risk, more flexibility on scheduling, or a stepping stone into full trucking. Full semi makes sense if you want maximum earning potential and are willing to invest more upfront.
Common Mistakes to Avoid
- Underestimating insurance costs. Budget $1,000/month minimum. Do not operate without proper coverage — one accident without insurance will end your business.
- Running overweight. Hot shot trucks are easy to overload. Know your GVWR, weigh your loads, and stay legal. A single overweight fine in Ontario is $200 to $20,000+ depending on severity.
- Accepting every load. Low-ball rates erode your margins. Know your cost per mile and refuse loads that do not cover it.
- Ignoring maintenance. A blown transmission on an F-450 is a $6,000 to $10,000 repair and a week of lost revenue. Preventive maintenance is cheaper than breakdowns.
- No written contracts. Get rate confirmations in writing before every load. Verbal agreements lead to payment disputes.
Managing Your Hot Shot Business with TruckerPro
TruckerPro's dispatch and fleet management platform handles the operational side of hot shot trucking — load management, invoicing, driver compliance, IFTA reporting, and expense tracking. The dispatch board lets you manage multiple loads, track deliveries in real time, and generate invoices automatically when proof of delivery is captured. Whether you are a single-truck hot shot operator or growing into a multi-truck fleet, the system scales with your business. Compare options in our best trucking software for small fleets guide if you are still evaluating platforms.