Safety — TruckerPro Insights

Public Works Truck Preventive Maintenance in Canada

Source: CCMTA, National Safety Code Standard 11: Commercial Vehicle Maintenance and Periodic Inspection (January 2020)

Quick answer: A Canadian public works truck over its province's weight threshold sits under three layers of maintenance rules. A driver inspects it every 24 hours under NSC Standard 13, a licensed facility inspects it on the province's periodic cycle, and the fleet runs a written preventive maintenance program with records kept for two to five years, depending on the province. The service intervals are mostly yours to set, starting from the manufacturer's schedule, plus pre-winter and spring work for plows, sanders and salt damage.

Sources were checked on November 15, 2026: CCMTA's NSC Standards 11, 13 and 15, the provincial regulations linked below on each government's official law site, SGI pages, and Environment and Climate Change Canada's road salt pages.

This guide is for public works fleets that run plows, sanders, dump trucks, garbage packers and water trucks. Sections that give practice rather than law say so. Whether your trucks need a safety fitness certificate is covered in NSC certificates and CVOR for municipal trucks.

What does the daily trip inspection have to cover?

The daily trip inspection comes from National Safety Code Standard 13, which each province adopts in its own law. Trucks, tractors and trailers are inspected under Schedule 1 every 24 hours while they are operated. Schedule 1 lists 23 systems, from air brakes to wipers, and splits each into defects and major defects.

The report shows the plate or unit number, the carrier, the date, time and place, a signed statement, the inspector's printed name and the odometer reading. Defects are reported to the carrier before the next inspection. A major defect, such as an inoperative parking brake or a flat tire, is reported at once, and nobody may drive the truck while it is present. Drivers hand in reports within 20 calendar days, and the carrier keeps each report and its certification of repairs for at least 6 months.

Practice, not rule: Schedule 1 is a minimum, and Standard 13 lets the format vary. Many public works fleets add lines for the plow hitch, hydraulics, the spreader and the warning lights.

How do the provinces apply the trip inspection to municipal trucks?

Few provinces carve out municipal trucks:

  • Ontario. O. Reg. 199/07 excludes fire apparatus. A road service vehicle counts as an emergency vehicle, but is exempt only while responding to or returning from an emergency. Reports are kept six months.
  • Manitoba. M.R. 95/2008 covers vehicles with a GVWR of 4,500 kg or more. It does not apply to "a vehicle used solely for the purpose of snow removal by or on behalf of a traffic authority," or to a vehicle used in relation to a fire, flood or similar event. Within 160 km of base the report duties are lifted, not the inspection. Reports are kept six months.
  • Saskatchewan. The Trip Inspection Regulations apply to trucks over 11,794 kg. Emergency vehicles are excluded, and so is road construction and maintenance equipment, which "does not include a truck." Reports are kept six months.
  • Alberta. AR 121/2009 applies over 4,500 kg, with disaster relief its only exemption. Within 160 km of the home terminal, a driver who returns each day still inspects but need not write the report. Reports are kept 6 months.
  • British Columbia. Division 37 requires an inspection before the first trip each day. The written report does not apply to emergency vehicles or 2-axle trucks licensed at 14,600 kg or less. Reports are kept 3 months.
  • Quebec. The vehicle safety standards regulation requires a circle check within the last 24 hours; a fire truck may be checked on its return, and at least every 7 days if unused. Emergency-service use and tool vehicles are exempt. Documents are kept 6 months.

Which periodic inspections are mandatory in each province?

NSC Standard 11 Part B says trucks and trailers are inspected at least yearly and buses at least twice a year, by an authorized inspector at a government or government-approved facility (NSC Standard 11). Each province sets its own threshold and cycle:

Province Which trucks Truck interval Rule
Ontario Truck and any trailer over 4,500 kg combined (gross, registered gross or manufacturer's rating) To the end of the 12th month after inspection O. Reg. 174/22
Manitoba Trucks, truck tractors and trailers with a GVWR of 4,500 kg or more 12 months after the end of the month of issue M.R. 76/94
Saskatchewan Trucks and power units in Class A, C or D registered at 22,000 kg or more; 11,794 kg or more if they operate in more than one jurisdiction 12 months for trucks, 6 months for power units Vehicle Inspection Regulations, 2013; SGI
Alberta Commercial vehicles registered at 11,794 kg or more (CVIP) To the 12th month from the month of issue AR 211/2006
British Columbia Commercial vehicles licensed over 8,200 kg (CVIP) 6 months; 12 months for emergency vehicles and for trucks up to 17,300 kg Division 25
Quebec Heavy vehicles with a GVWR of 4,500 kg or more, except tool vehicles and farm machines, plus emergency vehicles Annual SAAQ mechanical inspection, or a certified preventive maintenance program instead Highway Safety Code, s. 521; r. 32, s. 6

None of these rules exempts a truck because a municipality owns it. Manitoba excludes farm trucks and Winnipeg and Brandon transit buses, and BC excludes federally owned vehicles, but neither excludes municipal trucks. For Alberta fire trucks, the sample Municipal Firefighting Vehicle Permit requires a CVIP inspection within the previous three years or every 5,000 km, whichever comes first, and maintenance and inspection at least every 12 months or every 2,000 km (sample permit).

What maintenance records do you have to keep?

NSC Standard 11 Part A says every carrier must systematically inspect, repair and maintain each vehicle it controls and keep, for each one, its identification, a way to show the nature and due date of each task, a dated record of inspections and repairs with invoices, a lubrication record, and any axle or suspension change that affects a weight rating. A facility audit under NSC Standard 15 checks it and looks for a recall system that reminds the shop when inspections and preventive maintenance are due.

Province How long to keep maintenance records Source
National Safety Code At least 2 years, and 6 months after the vehicle leaves the carrier's control NSC Standard 11 Part A
Ontario At least 2 years, or 6 months after the operator stops operating the vehicle, whichever is shorter O. Reg. 199/07, s. 16
Manitoba At least 2 years after making the record M.R. 132/2024, s. 10
Saskatchewan The year the record relates to and 4 more years Record-Keeping Regulations, s. 9
Alberta The current calendar year and the 4 years before it; 6 months after a vehicle is retired AR 121/2009, s. 38
British Columbia The last 3 years of ownership and 6 months after disposal Division 25, s. 25.18
Quebec The last 2 years the vehicle is in use and 12 months after its ownership is transferred r. 32, s. 202.2

Ontario's list adds who did the work, part receipts, the odometer reading at the end of each job, and annual inspection certificates. Saskatchewan's includes monthly reports prepared as part of the carrier's system of regular and continuous inspection and maintenance.

What PM intervals make sense for plows, sanders and dump trucks?

Standard 11 sets no fixed interval. CCMTA says carriers are better placed to choose intervals for their own equipment and calls the manufacturer's schedule "the single best piece of advice" for designing a program. It gives a tiered example and says whatever schedule a carrier picks, it must follow:

Level Example interval in NSC Standard 11 What it covers
A Monthly, or by distance such as 1,600 km Lights, tires, leaks, fluids, reported defects
B Every two or three months, or 10,000 to 30,000 km A items plus brakes, hoses, filters, lubrication
C Every six months or 50,000 km The remaining systems, often just before the periodic inspection

Some provinces add legal duties. Ontario requires every operator to set up a system to periodically inspect and maintain its commercial motor vehicles and keep a written record of it (HTA, s. 107(1)), and Alberta requires a written maintenance and inspection program for vehicles registered over 4,500 kg (AR 121/2009, s. 6). Quebec goes further: it requires an owner to inspect each heavy vehicle at least once every 6 months, and an owner that replaces the SAAQ inspection with a certified preventive maintenance program services a heavy vehicle every 3 months, or every 6 months if it runs under 20,000 km a year (r. 32, s. 199 and Schedule II).

Practice, not rule: plow trucks fit distance-only intervals poorly, because a storm shift can run for hours at low speed and add few kilometres. Many shops use months as the main trigger for winter units, follow the manufacturer's engine-hour intervals where the truck reports hours, and give the plow, hydraulics and spreader their own PM checklists.

How should a public works shop get trucks ready for winter?

Practice, not rule. A pre-winter round usually runs in early fall, while there is time to order parts:

  • Chassis. A full C-level inspection, brakes measured, batteries, block heaters, cooling, and the defroster, a Schedule 1 major defect when it cannot clear the windshield.
  • Plow and hitch. Moldboard, cutting edges and wear shoes, trip springs, the hitch, pins and mounts, and plow lights and wiring.
  • Hydraulics and spreader. Hoses, fittings, cylinders, valves and fluid; the conveyor or auger, spinner, gates, controller and sensors, and any pre-wet system.
  • Lights. Ontario requires a road service vehicle that plows, salts or de-ices to carry a lamp producing flashing blue light visible for 150 metres (HTA, s. 62(31)); check your province's lighting rule.

Calibrate each spreader too. Environment and Climate Change Canada's Code of Practice for the Environmental Management of Road Salts applies to organizations that use more than 500 tonnes of road salt a year or have salt-vulnerable areas, and recommends salt management plans. Its five-year review calls the Code voluntary and cites the Transportation Association of Canada recommending "that all spreaders be calibrated before the start of the season," with checks during the season, including after repairs to anything that affects salt delivery.

What belongs in the spring maintenance round?

Practice, not rule. Spring work undoes winter:

  • Wash off salt and brine, then look for corrosion on the frame, brake lines, air tanks, connectors and spreader body.
  • Measure and record the brakes.
  • Remove, repair and store the plow and spreader ready for fall.
  • Check wheel fasteners for curb and ice damage; a loose or missing fastener is a Schedule 1 major defect.
  • Book the periodic inspection for summer dump or water units if it falls due before winter.

How TruckerPro fits a public works shop

TruckerPro is a TMS for Canadian and US carriers, based in Winnipeg, Manitoba; see municipal fleet management software for how it applies to public fleets. Maintenance is on the Elite plan. Work orders carry parts, labour, documents and an activity log. A work order can hold a PM inspection checklist built from the SAAQ preventive maintenance sheets (form 6609A for trucks, 6648A for trailers), where the mechanic marks each component compliant, minor defect, major defect or not applicable, and the completed checklist is saved as a PDF with the repair. Drivers can file a Schedule 1 pre-trip inspection from the TruckerPro driver app without a load.

PM schedules are set by distance, by days, or both. A daily job works out what is due from the date and the odometer, which is fed by the ELD connection, fuel card transactions and completed work orders, opens a PM work order for each item due or overdue, and sends one email digest a day. Warranties, tires, parts inventory and mechanics have their own records, and maintenance expenses roll up into per-truck reports in CSV and PDF. Each truck and trailer keeps a document file for registration, the annual safety inspection, CVIP, insurance and permits, with the CVIP expiry date tracked. ELD connections to Samsara, Motive and Geotab come with every carrier plan, and fuel cards start on the Operate plan. See fleet maintenance software.

What it does not do: TruckerPro cannot schedule PM by engine hours, only by distance and days, which matters for plows, loaders and other units that work for hours while the odometer barely moves; set those on days, or track hours elsewhere. It does not decide whether a truck passes a provincial inspection; a licensed inspector does.

Frequently asked questions

How often must a municipal plow truck be inspected in Canada?

Each day it is driven, a covered plow truck needs a trip inspection that is valid for 24 hours, unless a provincial exemption such as Manitoba's snow removal exemption applies. It also needs a periodic inspection at a licensed facility: every 12 months in Ontario, Manitoba and Quebec, every 12 months in Alberta for trucks registered at 11,794 kg or more, and every 6 or 12 months in British Columbia depending on weight.

How long do you have to keep truck maintenance records?

It depends on the province. The National Safety Code says at least two years, and six months after the vehicle leaves the fleet. Ontario and Manitoba keep to two years. Alberta and Saskatchewan require five years in total, British Columbia the last three years of ownership plus six months after disposal, and Quebec the last two years of use plus 12 months after the vehicle is transferred.

Does the National Safety Code set preventive maintenance intervals?

No. NSC Standard 11 requires every carrier to inspect, repair and maintain its vehicles systematically, but leaves the intervals to the carrier because equipment and duty cycles differ. It calls the manufacturer's maintenance schedule the best starting point and says the carrier must follow whatever schedule it sets. Quebec goes further: its regulation requires owners to inspect each heavy vehicle at least once every 6 months.

How long must daily trip inspection reports be kept?

NSC Standard 13 says carriers keep each trip inspection report and its certification of repairs for at least 6 months. Ontario, Manitoba, Saskatchewan, Alberta and Quebec use 6 months. British Columbia requires the original report to be kept for at least 3 months. Under the national standard, drivers hand reports in within 20 calendar days.

Should spreaders be calibrated every year?

It is recommended practice, not a trip inspection rule. Environment and Climate Change Canada's review of its road salt Code of Practice quotes the Transportation Association of Canada recommending that all spreaders be calibrated before the start of the season, with checks during the season, including after repairs to anything that affects salt delivery.

TruckerPro TMS
“Still dispatching from spreadsheets?”
Your fleet deserves better
than copy-paste logistics.
Book a guided demoGuided demo available
BorderPro
“Stuck at the crossing again?”
Prepare customs filings
before the border.
Compare BorderPro OptionsSee current pricing

Run your fleet from one platform

Dispatch, compliance, billing, and driver management — built for Canadian carriers. Plans start at $99/mo for up to 5 trucks (from $79.20/mo billed yearly), with unlimited staff users and no per-driver charge; features vary by plan.

See TruckerPro Plans