Truck, trailer and driver records import from Samsara, so nobody retypes units.
Connect your Samsara account to TruckerPro and keep your Samsara hardware. Truck positions, hours clocks, fault codes and safety events come into the system your dispatchers already work in.
Truck, trailer and driver records import from Samsara, so nobody retypes units.
Drive, shift and cycle time remaining show on the ELD dashboard and logbook board.
Fault codes and safety events appear per truck, refreshed every 15 minutes.
Quarterly IFTA miles by jurisdiction pull from Samsara when you ask for them.
Logbook audits read Samsara duty logs and produce a PDF report.
Work orders can fill the odometer from the latest Samsara reading.
Most fleets are connected in a few minutes.
TruckerPro asks for positions every 2 minutes. Each position is already a minute or two old when it arrives, so a moving truck normally reads 3 to 6 minutes behind.
The connection is read-only. TruckerPro does not change anything in your Samsara account.
| Data | In TruckerPro | How often |
|---|---|---|
| Truck GPS | Yes, with place name | Every 2 minutes |
| HOS clocks | Drive, shift and cycle | When the dashboard opens |
| Drivers | Yes | On import |
| Trucks and tracked trailers | Yes | On import |
| Odometer | Yes | Every 15 minutes |
| Fault codes | Yes | Every 15 minutes |
| Safety events | Yes | Every 15 minutes |
| Idle time | Yes | Every 6 hours |
| Fuel level | Tank and DEF percent | When the dashboard opens |
| IFTA miles | By jurisdiction | On request, full calendar months |
| Duty logs for audit | Yes | On request |
Compare the plan that contains your required workflows, or request a free guided walkthrough. Product access requires a paid subscription unless sales provides a written trial offer.
View plansYes. TruckerPro connects to your Samsara account and reads truck GPS, HOS clocks, drivers, trucks, odometer, fault codes, safety events, idle time and IFTA miles. You keep your Samsara hardware and contract.
It is close to it. TruckerPro polls Samsara every 2 minutes, so a moving truck normally reads 3 to 6 minutes behind.
Yes. Drive, shift and cycle time remaining show on the ELD dashboard and logbook board. Duty logs are fetched on request for a logbook audit.
Yes. TruckerPro pulls miles by jurisdiction from Samsara when you run it, for complete calendar months. Fuel gallons come from your fuel cards or entries, not from Samsara.
No. DVIRs stay in Samsara. Fuel purchases and geofence events do not come across either.
Yes. TruckerPro is built in Canada and connects to Samsara accounts for fleets on both sides of the border.